2025 TITAN 53' 2 AXLE WALKING FLOOR DROP FRAME 2 UNITS WO# 7373
| Type | Walking Floor |
| Year | 2025 |
| Manufacturer | TITAN |
| Stock # | T3SD000840 |
| Vin # | 2TVWF5323SD000840 |
| Suspension | INTRAAX AAL 25K |
| Length | 53 ft |
| Width | 102" |
| Height | 13' 3/4" |
| Tires | GOODYEAR |
| Wheels | 8.25 X 22.5 |
| # of Axles | 2 |
| Tarp | |
| Liner |
Description
- Long stroke Haldex brake chambers. Suspension plumbed to deflate when brakes are set (auto dump). No trailer mounted dump control. No control box needed.
- Add (1) grab handle, located Roadside of front access door
- Charge to make trailer a drop deck which includes: trailer drop, extra sidewall material, drop floor kit, & 2299 slat upcharge. Trailer floor to have 12 ½” drop.
- Add 2” air pressure gauge to Roadside, front corner mitre at eye level.
- a) Door pusher bar/prop to be installed, attached to rear air door.
- b) Special cone locks to operate from outside of sidewall.
- c) Tailgate release control mounted on plate, located roadside, just ahead of subframe.
- License plate mounted in door, Curbside of center markers
- Tarp support rod with standoffs to be added to rear side of top rear header tube.
- Ship Loose: QTY (5) tarp ratchet mounts with protectors to suit Deroche Tarp
- Add 3.5” hydraulic pressure gauge to frame (flush mount), located beside the on/off handle with identifying label
- Add 9’ hoses to front wall
- Add TireMaax Pro Tire Inflation system to all axles
Customer Application Garbage Application
Base Model 53-2-TW-DF-WF-Dropframe OT
Style Drop style – See Note #3
Wall Configuration
Front To suit garbage application – See Note #2
Sides To suit garbage application
Rear Door SDSWG, Door in Door, Air Release, Lights in Door, Compactor posts, with reinforced bottom lock finger – See Note #5
Overall Length 53 ft
Overall Width 102” nominal
Overall Height 13’ 3 3/4” (159.75”) approx.
King Pin Location 36” WELD IN
Upper Coupler 5/16” THK Steel– Set @ 49” high
Number of Axles
Primary Two (2)
Lift None (0)
Axles Intraax-Straight Spindle
Axle Track 77.5”
Suspension Intraax AAL 25K
Location of Spreads see axle layout
Hub/Drum Assembly 10 Stud Dura-Light-Hub / Centrifuse Drum
Disc Wheel Size 8.25 x 22.5
Rims STEEL Standard duty prepainted white
Tires Brand Goodyear
Size 275/70R22.5 – 38.0 dia
Tread Endurance RSA
Ply 18
Quantity 8
Axle Layout FRONT-Primary-50-Primary-84-REAR
Oil Seals To suit axles
Lubricants Oil 80W-90
Brakes ABS 2S/2M Meritor Wabco – See Note #1
Slack adj. Haldex Auto – See Note #1
Cam Enclos All axles & c/w Dust Shields – See Note #1
Lift Kits None
Lift Controls None
Frame Width 48”
Rear Bumper No bumper required since bottom of lightbar is less than 22” from ground
Option #1 4 x 4 alum bumper blocks w/ v-notch on bumper uprights
Option #2 Bolt on Tow Hook, located Roadside
Tire Carrier None
Landing Gear Jost Standard A400 Series: A401-G3 -Low Profice cushion foot
Top Rail Titan Tapered V1
Top Cross Tube (less rear) Qty 1 – spring steel (two piece style)
Floor Crossmembers 12” Centers
Keith Walking Floor Kit Running floor II – 3.5” dia cylinders – 6” stroke
Slat Model & Width 26 slat: 2299 slats DF 2PC (1/2” Triple Ridge Impact – 3.5” W) 1212 seals – T-blocks Rear at – See Note #3
Slat Wear Strips 24” long, Flush, Filler bar wear strips
Continuous Bearing Continuous splash/hold down bearings
Side Wall Wear Plates Boomerang Style
Front Access Door STD (35”W x 37.5”H) Curbside hinge with flip step, located center
Tarp Style None – See Note # 7 & 8
Tarp Header Flat – front & rear
Tarp Basket None
Tarp Hooks None
Axle Fender None
Hyd Fitting Pressure 1” – Quick coupler – Male – See Note # 10
Return 1” – Quick coupler – Female – See Note # 10
Mud Flaps Style Titan Black Rubber
Location (2) at rear (attached to light bar)
Mud Flap – Landing Gear None
Paint Body – Color Natural Aluminum
Run – Gear Titan Black
Hub / Drum Same as Running Gear
Rims or Disc Pre-painted white
Light package (Plug Form) Front: (1) mkr per corner mitre. Sides: (2) mkrs (includes
midturn) Rear: (2) mkrs at top (3) 4” round red taillights per side
in door, with center cluster of (3) mkrs in door
Add Sidewall Lights Add (9) mkrs lights per side, for a total of (11) bottom
Access Catwalk None
J-Ladder Front 2 pc ladder middle of front wall with (1) PC on access door & (1) PC above it, with 10” standoffs
J-Ladder Rear None
Steps-Front – Out None
Steps-Front In None
Steps-Rear None
Additional specifications:
Volume: 149.3 cu yds
Estimated weight, 19,930 lbs +/- 3%
Financing
Finding the right repair shop or part to fit your needs is just part of the process of getting your truck on the road. Ken’s Truck Repair goes above and beyond to provide you and your company the best possible customer service; helping you find what you’re looking for and assisting you in finding available financing options.
Not every bank understands your business. At Ken’s Truck Repair, we do, and we’ve formed strong relationships with trustworthy banks and creditors who understand your unique needs, and are willing to work with you. Our partners have industry-specific financing options available to assist with the purchasing of new or used equipment.
