2026 TITAN 53' 3 AXLE TIPPER TRAILER 6 UNITS WO# 7423
| Type | Tipper |
| Year | 2026 |
| Manufacturer | TITAN |
| Stock # | TXTD000196 |
| Vin # | 2TVTP533XTD000196 |
| Suspension | INTRAAX AAT 25K |
| Length | 53 ft |
| Width | 102" |
| Height | 13' 4" |
| Tires | GOODYEAR |
| Wheels | 8.25 X 22.5 |
| # of Axles | 3 |
| Tarp | |
| Liner |
Description
- Trailer will be going on a tipping platform. Tipper backstop height ?
- Approximately 38’ ½” from center of landing gear to rear of rubber bumpers
- Invert axles
- Boomerang wear plates
- Add PSI Meritor Tire Inflation System to all axles
- Locate ball valve on front air/electrical plate to air pilot operate lift (not in control box) and mount control box directly behind LG
- Run 2-wire cable from control box to front wall for customer but do not hook up to anything. Leave wire loose behind front plate. Add O-ring terminals
2026 53′ 3 AXLE TIPPER TRAILER 6 UNITS AVAILABLE CALL FOR PRICING
Customer Application Garbage sheet floor
Base Model 53-3-TW-TP (open top)
Body Style Straight
Panel Configuration 7-14” + 1-6” panels to suit garbage application
Overall Length 53’
Overall Width 102” Nominal
Overall Height 13’ 4” (160”) approx.
King Pin Location 36” bolt in
Upper Coupler Aluminum coupler assembly with stainless Steel wear plate (3″ drop) – Set @ 48” High
Number of Axles Primary (2) Two
Axle 5” round .580 Wall-Straight Spindle
Axle Track 77.5”
Suspension Reyco 21B FAB w/ inner & upper wear pads
Location of Spreads see axle layout
Hub & Drum Assembly 10 stud Dura-Light – Hub/Centrifuse Drum
Disc Wheels Size 8.25 x 22.5
Rims Aluminum-LVL Outer/Inner
Tires Brand Goodyear
Size 11R22.5 – 41.4 dia
Tread Endurance RST
Ply 16
Quantity 8
Number of Axles Lift (1) One
Axle Intraax – Straight Spindle
Axle Track 77.5”
Suspension Intraax AAT 25K
Location of Spreads see axle layout
Hub & Drum Assembly 10 stud Dura-Light – Hub/Centrifuse Drum
Disc Wheels Size 8.25 x 22.5
Rims Aluminum-LVL Outer/Inner
Tires Brand Goodyear
Size 11R22.5 – 41.4 dia
Tread Endurance RST
Ply 16
Quantity 4
Axle Layout Front-Lift-50- Primary-50-Primary-84-Rear
Oil Seals To suit axles
Lubricants Oil 80W-90
Brakes ABS 2S/1M Meritor Wabco
Slack Adj DRUM BRAKES: Meritor Auto
Cam Enclos DRUM BRAKES: All Axles –&c/w Dust Shields
Lift Kits Hendrickson UBL
Lift Controls Power Down
Springs 3 leaf TRA-3384
Frame Width 48”
Rear Bumper Steel, flush, with underride
Rubber Bumpers Tailgate Rubber Tipper T block bumpers
Tow Hooks J style, Roadside
Tire Carrier None
Floor ¼” THK aluminum sheet, & 5/16” THK aluminum sheet at 6’ of rear
Floor Cross members U channel: 18” centers and 12” centers over subframe
Landing Gear Jost Standard A400 Series: A401-G3- low profile cushion ft – See Note # 2
Top Rail Titan Tapered, V1
Top Cross Tube Qty Qty (1)
Top Cross Tube Type Spring steel (two piece style)
Rear Door Overslung hinge, door in door, air release & safety chain
Rear Door Seal Rubber
Front Door None
Tarp Header None
Tarp Basket (Hoops) None
Tarp Hook Side hooks approx. 54” o/c & 4 hooks at rear
Tarp/Roof None
Mud Flap/Style Titan Black Rubber
Location (2) ahead (2) behind prim group & (2) at rear
Paint
Body Natural Aluminum
Run – Gear Titan Black
Hub/Drum Same as running gear
Rims or Disc Aluminum
Std Light Package – plug form Front: (2) mkrs. Sides: (3) mkrs (includes midturn) Rear: N0 mkrs at top with center cluster of (3) mkrs in light bar, (2) 4” round red taillights per side
Access
Catwalk – front None
Ladder – front Middle of frontwall full height
Ladder – rear QTY (1) Middle full height with (1) small catwalk on each side
Steps – front – out None
Steps – front – ins None
Steps – rear None
Additional Specifications:
Truck is uncoupled from trailer when trailer is on platform being tipped. Platform length?
Weight estimate: 15,560 lbs. +/- 3%
Volume estimate: 137.8 cu yards
Financing
Finding the right repair shop or part to fit your needs is just part of the process of getting your truck on the road. Ken’s Truck Repair goes above and beyond to provide you and your company the best possible customer service; helping you find what you’re looking for and assisting you in finding available financing options.
Not every bank understands your business. At Ken’s Truck Repair, we do, and we’ve formed strong relationships with trustworthy banks and creditors who understand your unique needs, and are willing to work with you. Our partners have industry-specific financing options available to assist with the purchasing of new or used equipment.
