2007 EAST 50' GENESIS WALKING FLOOR TRAILER
| Type | Walking Floor |
| Year | 2007 |
| Manufacturer | EAST |
| Stock # | EK41084 |
| Vin # | 1E1U2Z2827RK41084 |
| Suspension | REYCO 21B |
| Length | 50 ft |
| Width | 102" |
| Height | 100" |
| Tires | 11R x 22.5" |
| Wheels | 8.25 X 22.5 |
| # of Axles | |
| Tarp | |
| Liner |
Description
2007 EAST 50′ GENESIS WALKING FLOOR TRAILER
BODY
Length: 50’
Width: 102”
Height: 100”
Bulkhead: 3/16” – Mandoor
Side Material: Genesis Front – 0.150 Middle – 0.150 Rear – 0.150
Catwalk: None
B.H. Ladder: Rung – Drivers side
Crossmember: “I” Beam – 12” C/L
Floor Make: Keith
Floor Material: 2299 W/Sloped
Wear Pads: Cleanout
Hose Hanger: Yes
Tire Carrier: Yes
TAILGATE
Height: Full
Type: Single
Style: Genesis
Material Thickness: 0.150
Side Swing Hinge: Passenger side
Gate seal: None
Gate Ladder: Cast / Center
Tarp Hooks: None
Winders: One
Gate Guide: Yes
Gate Control: Mechanical
Pockets: Extruded
Cross pipe: Two
HYDRAULICS
Hoses: Yes
Fittings: Wing Type
HP: 1” Female
LP: 1” Female
Access Panel: Access to Steel Hydraulic lines.
CHASSIS
Model: Tandem
Type: Aluminum Sub Frame
Axle to Axle: 49”
Rear Axle Setting: 26 1/2”
5th Wheel Ht: 49”
Pin Setting: 36”
Suspension: Reyco 21B
Springs: HD Single Leaf
Axles: 5” Round – 5/8” TP
Brakes: 16 ½” x 7”
Dust Shields: Yes
Brake Chambers: Top of axle
ABS: 4S/2M
Hubs: 10 S AL / LWBD-PIL – East Elite
Wheels: 8.25 x 22.5 Aluminum Mill Disc
Tires: 11R x 22.5”
Dollies: 2 Speed Mark V
Location: Driverside Crank
Bumper: Tubular
Tow Hooks: Two
Push Blocks: Yes
Weight: 18,010 lbs
Volume: 125 cu yds
Additional Work Completed at KTR
– Check trailer over, prep for sale
– Lower section of bulkhead plated
– Reinforce bulkhead and replace hinge for man door
– Replace hydraulic hoses on front of trailer and connectors
– Replace leaking hydraulic hose under trailer
– Repair standoffs for ladder on front of trailer
– Cut out and repair broken section of crossmember, Overly cracks in other cross members
– Repair and replace lights as needed
– Repair tailgate sides and bottom
– Replace torque arm bushings on front axle
– Replace wear pad in spring hanger and replace cross pipe between hanges
– Replace spring bar
– Patch holes on inside of trailer
– Replace missing mudflap
– Repair bad section of side seal
– Remove 4 dented slats, straighten, and reinstall with new bearings and hardware
Financing
Finding the right repair shop or part to fit your needs is just part of the process of getting your truck on the road. Ken’s Truck Repair goes above and beyond to provide you and your company the best possible customer service; helping you find what you’re looking for and assisting you in finding available financing options.
Not every bank understands your business. At Ken’s Truck Repair, we do, and we’ve formed strong relationships with trustworthy banks and creditors who understand your unique needs, and are willing to work with you. Our partners have industry-specific financing options available to assist with the purchasing of new or used equipment.
